Featured

These Cult x Vans Waffle Sole Grips are quickly becoming as classic as the Vans Waffle Sole itself! Made by ODI in the USA these grips are a carbon copy of the classic Vans Shoe Sole. Featuring a 150mm length and 31mm diameter.

-Flanges: No
-Length: 150mm
-Diameter: 31mm
-Colour: Army Green, Black, Blue, Gum, Purple, Red, Pink.

A complete re-design by Vans means that these shoes are now perfect for modern day skateboarding. These now feature updated foxing tape as well as sturdy suede and a mix of 6oz and 10oz canvas uppers which give the iconic look as well as the performance benefits the skating demands. These shoes also feature Vans Duracap technology and POPCUSH insole.

Signature Dan Paley Flangeless grips from BSD. Made from soft Krayton rubber, 160mm long with a 29mm diameter when installed. Comes complete with colour matched Plastic BSD barends.

-Flanges: No
-Length: 160mm
-Diameter: 29mm
-Colour: Black, Chocolate, Gum, Surplus Green, White

The Demolition Momentum Tyre is one of lightest wire bead tyres available. Featuring low profile rectangle tread pattern for grip on any terrain. Regulated up to 110psi the Momentum tyre is available in 20 x 2.20" and 20 x 2.35" widths.

-Beading: Wire
-Width: 2.20", 2.35"
-Wheel Size: 20"
-PSI: 110
-Weight: 538g (2.35")

New Eclat Pulsar Flangeless Grips made by ODI in the USA. The Pulsar Grips are 165mm long and feature a 31.5mm thickness. Includes Eclat Plastic Bar Ends.

-Flanges: No
-Length: 165mm
-Diameter: 31.5mm
-Colour: Army Green, Black, Gum, Purple, Red

This Cult 510 Chain is a perfect 510 gauge chain for any BMX bike. Features one half link so you can get that perfect fit and stronger than its 410 counterpart

-Chain Type: Full Link (One Half Link)
-Chain Width: 1/8"
-Colours: Black, Gold, Silver
-Weight: 249g

Brand new from Cult is their collaboration tyre with Vans. The Cult X Vans tyre is something that has been in the pipeline for a while and its finally here. Manfuctured by Vee Rubber, these tyres feature the iconic waffle tread pattern and now come in a slighty wider 2.40" width only.

-Beading: Wire
-Width: 2.40"
-Wheel Size: 20"
-PSI: 110
-Weight: 720g (2.40")

Gilbert Crockett’s signature Gilbert Crockett skate shoe is made with sturdy suede and 10 oz canvas uppers featuring DURACAP reinforcement rubber underlays in high wear areas for unrivaled durability. The new POPCUSH energy return sock liners provide superior cushioning and impact protection while helping to lessen leg fatigue for longer skate sessions, and the revolutionary WAFFLECUP construction offers the support of a cupsole without sacrificing any of the grip or boardfeel of a traditional vulcanized shoe. Leather accents and molded heel pocket inserts round out the design.

The classic Longneck grip pattern from ODI which has been tried and true for years! These are the new Flangeless, Soft compound for maximum comfort!

-Flanges: No
-Length: 160mm
-Diameter: TBA
-Colour: Black, Red, Purple, Navy Blue, Light Blue, Grey.

The Animal GLH Tyre is a great street BMX tyre from America's biggest street brand. It features an original tread pattern and is certifies to hold up to 110psi. Really good durable BMX tyre. Available in 2.30" width.

-Beading: Wire
-Width: 2.30"
-Wheel Size: 20"
-PSI: 110
-Weight: 762g (2.10"), 796g (2.30")

Brand New Safari Plastic Pedals from BSD. These Safari Pedals are the signature pedal of Reed Stalk. Featuring a solid Nylon construction and heat treated axles, these Safari pedals feature a wider body for greater stability.

-Material: Plastic
-Axle Size: 9/16" (3 Piece Cranks)
-Colour: Black, Dark Red, Dust Blue, Grey, Sand, Surplus Green
-Weight: 365g

New Inner tube from Cult offering the wider tyre user a thicker tube for use with wider tyres. Caters for tyres between 20 x 2.20" and 20 x 2.40". Standard Schrader/Car Valve.

-Tube Size: 20 x 2.20-2.40"
-Valve Type: Schrader/Car Valve

Handy 15mm Pedal Spanner. Grab one for building your bike or just for using when your out and about!

-Tool Type: 15mm Pedal Spanner

Brand new for 2017 are the Odyssey Twisted Pro Plastic Pedals. One of the longest running products on the books revamped for the modern day. The Twisted Pro Pedals feature a wider platform than the classic Twisted Pedals. They are 6mm wider and 11mm longer. Offering a greater platform for your foot to stand on.

-Material: Plastic
-Axle Size: 9/16" (3 Piece Cranks)
-Colour: Black, Flo Green/Black Swirl
-Weight: 413g

The Slim by Four is a BMX specific brake pad with a symmetric shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. Available in Regular compound (Black) and Soft compound (Clear).

-Compound: Regular (Black) , Soft (Clear)
-Colours: Black, Clear
-Weight: 50g

The FIT FAF Tyre (Fast as F**k) is a great all round tyre, available in 4 sizes which are 2.10, 2.25, 2.30, 2.40. All the tyres feature a similar tread but the 2.25 has a thicker and deeper tread, ideal for those looking for a bit more grip.

-Beading: Wire
-Width: 2.10", 2.25", 2.30", 2.40"
-Wheel Size: 20"
-PSI: 110
-Weight: 558g (2.10"), 697g (2.25"), 723g (2.30"), 726g (2.40")

New Plastic Pegs from United Bike Co. United have gone for a solid heat treated chromoly inner peg with nylon plastic sleeve. This way they made inner chromoly peg as slim as possible to make the Nylon sleeve thicker so they last longer. Available in 4" length. 14mm with 10mm (3/8") adapter.

-Peg Type: Plastic Peg
-Quantity: Single
-Length: 4"
-Axle: 14mm with 10mm adapter
-Colours: Black
-Weight: 182g (4")

New Michael Harkous signature grips from Primo. The Cali Grip is made from an extra durable and grippy rubber compound that is 170mm long and 31mm in diameter. Comes with Primo Nylon Bar Ends.

-Flanges: No
-Length: 170mm
-Diameter: 31mm
-Colour: Army Green, Black, Dark Blue, Tan

New Stevie Churchill signature tyre from Primo. Stevie's signature tyre features a smooth tread pattern with Micro Knurling all over for extra traction. Available in a wide 20 x 2.45" width.

-Beading: Wire
-Width: 2.45"
-Wheel Size: 20"
-PSI: 110
-Weight: 720g (2.45")

The Original BMX Linear Cable from Odyssey. This is the original Odyssey Linear and doesn't feature the newer K-Shield housing. Only available in discontinued colours.

-Cable Type: Straight Through
-Colours: Blue, Fluro Yellow, Hot Pink, Red, White
-Weight: 90g

The Mainline is S&M's trail tire. Available in wire bead only featuring a high pressure casing. The 2.20 has a micro knurled surface on a directional tread designed to go on the rear. It features a center tread with a V-notched edge for accelerating and a flat edge for braking. The 2.40 front tire size is a nod to the old 2.125 Comp III we grew up riding in the front.

-Beading: Wire
-Width: 2.20", 2.40"
-Wheel Size: 20"
-PSI: 110
-Weight: 652g (2.20"), 737g (2.40")

The new Contact pedal was designed as the Federal team wanted a thin pedal with a large surface area. Our aim was to design the slimmest possible pedal without having to go to the unnecessary expense of using sealed bearings. The surface has a subtle concave shape which combined with the tapered pins and knurling makes sure your feet stay put.

-Material: Plastic
-Axle Size: 9/16" (3 Piece Cranks)
-Colour: Black, Khaki Gum, Orange
-Weight: 369g

Odyssey A-Brake Pads are general purpose brake pads designed specifically to fit standard BMX rims. Easy toe-in. General purpose. Sold in pairs.

-Compound: Regular (Black) , Soft (Clear)
-Colours: Black, Clear
-Weight: TBC

Supreme Bars from United Bike Co. Available in a 9" and 10" rise both featuring a 30" width, these Supreme Bars can suit a lot of riders at a great price. Fully seamless straight gauge chromoly construction and also feature 12º of backsweep and 1º of upsweep.

-Rise: 9". 10"
-Width: 30"
-Backsweep: 12º
-Up Sweep: 1º
-Colours: Black, Chrome, Gloss Clear
-Weight: 2lbs

Smaller 16 inch and 18 inch Inner tubes from yours truly. Caters for tyres between 16 x 1.75"/2.125" and 18 x 1.75"/2.125. Standard Schrader/Car Valve.

-Tube Size: 16 x 1.75"/2.125", 18 x 1.75"/2.125"
-Valve Type: Schrader/Car Valve

New Mark Gralla signature pedals from Animal Bikes. Featuring Nylon bodies with 20 molded square pins each side as well as micro knurled surface. The Rat Trap Pedals also feature a chromoly axle and are available in various colours.

-Material: Plastic
-Axle Size: 9/16" (3 Piece Cranks)
-Colour: Black, Blue, Green, Red, Purple.
-Weight: 379g

Hub Axle Adapters from Halo Wheels. These Adapters allow you to run 10mm or 3/8th Axles within 14mm dropouts. Ideal if you have a 14mm dropout frame but a 10mm/3/8th rear hub.

-Hub Spare Type: Hub Axle Adapters

Demolition molded plastic platform pedal, not from a catalog but our own design that our team had input in. Features a nylon plastic body with 10 square molded pins for added grip. Concaved horizontally to grip the sole of your shoe better and for added comfort.

Replacement Driver Bearings for Federal Freecoaster Hubs. Also fits other Freecoaster Hubs. Compatible with V2/V3/V4 Federal Hubs. Supplied as a pair.

-Fits: Federal Freecoaster Hubs

New Animal X T1 collab tyres are made from a dual compound rubber with a slick surface that's harder in the center to minimizing rolling resistance and reduce wear. The sides are made from a softer compound to increase grip and features a T1 inspired tread pattern for additional wallride and corner traction. 20 x 2.40" and 20 x 2.20" width available.

-Beading: Wire
-Width: 2.20", 2.40"
-Wheel Size: 20"
-PSI: 110
-Weight: 799g (2.20"), 867g (2.40")

Mid style bottom bracket from Federal Bikes. The Federal Mid BB comes with two precision sealed Mid BB bearings, Drive and None Drive cone spacers, one internal tube spacers (50mm) and a variety of axle spacers for that perfect setup. Available in 19mm, 22mm and 24mm.

-BB Type: MID
-Axle Size: 19mm, 22mm, 24mm
-Colours: Black
-Weight: 170g

Odyssey custom designed Par Ends come standard with all of our grips. Its special plastic composite will not shatter like cheap bar ends do, and they're very light weight. The Par End is a combination of the over the bar style cap and the inside the bar style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends.

-Material: Plastic
-Colour: Black, Grey, Pink

This Cult 410 Chain is a perfect 410 gauge chain for any BMX bike. Features one half link so you can get that perfect fit. If your looking for something slightly stronger go for the Cult 510 Chain.

-Chain Type: Full Link (One Half Link)
-Chain Width: 1/8"
-Colours: Black, Gold, Silver
-Weight: 249g

The Wafflecup BMX is now available in a slip-on style. The iconic Vans style upper with Duracap reinforcement, on top of our Wafflecup BMX construction, gives the BMX Slip-On maximum pedal feel and durability with a timeless style. This slip-on BMX shoe also features sturdy suede and 10 oz canvas uppers, rubber toe caps, and Vans original waffle outsoles made of a rubber that offers grip and support.

The Primo Integrated Headset features 2 precision sealed 45x45 bearings, Alloy top cap and comes in the regular Primo colors.

-Headset Type: Integrated 45/45
-Colours: Black, Oil Slick, Polished
-Weight: 62g

for the latest Vans X Cult slip on collab, they have added the Vans Wafflecup sole and Vans Duracap which means this pair is as strong, durable and comfortable as possible. Providing the ultimate pedal feel as well as a stylish design which ties in nicely with Cult's aesthetic.

The long awaited Etnies Chapters DVD is now here! For this collectors edition DVD they have teamed up with DIG to bring you not only the DVD but an amazing book documenting the making of the DVD and articles from trips whilst filming. Watch the worlds best do there thing in this iconic cinematic masterpiece. A BMX must have!

New for 2017 are the WeThePeople Hilt XL Grips. Based on a WTP classic, the Hilt XL has been revamped for 2017 to cater for the modern market. Featuring a 160mm length and 29.5mm diameter, the Hilt XL Grips fit todays bigger bars better and give that classic feel. Made from new Vex Rubber.

-Flanges: No
-Length: 160mm
-Diameter: 29.5mm
-Colour: Black, Sand, Yellow/Black Marble

Replacement Rim Tapes from yours truly. Available in Black with White Print and featuring a 30mm width to suit wider rims. Sold as a pairs and fit 20" BMX Rims.

-Rim Size: 20"
-Width: 30mm
-Colour: Black

The Colony Fantastic Plastic Pedals are a great lightweight Plastic Pedal from the Australian BMX brand. Available in Black with various different axle colours and weighing in at only 376 grams!

-Material: Plastic
-Axle Size: 9/16" (3 Piece Cranks)
-Colour: Black, Black/Blue, Black/Copper, Black/Gold, Black/Pink, Black/Purple, Black/Red, Black/Silver.
-Weight: 376g

Classic looking gloves from Bicycle Union, designed to look good and get the job done, with a white design that has no extra rubber or plastic to hinder dexterity. grippy, protective and stylish!

The latest issue of RideUK is titled 'Strength in numbers' as this one puts focus on the different crews of BMX riders across the UK. Featuring articles, photos, interviews and more!

Drive Side Plastic Hub Guard from Primo for their Remix Cassette Hub. Supplied with the appropriate cone nut to run the guard, this Primo DSG protects the Drive Side of your Remix Hub and slides great thanks to its Nylon construction. Replacement Nylon Guards are available separately so once you wear yours out you can replace the Nylon part separately.

-Material: Plastic
-Guard Type: Drive Side Guard
-Fitment: Primo Remix V1 CS Hub
-Weight: 55g

New S&M Mike Hoder signature grips are made in the USA by ODI from a Super Soft compound for the feel Mike wanted. At 31.5mm they are a little Bigger Than Most to help cushion some of Hoder's infamous landings. Also feature a 160mm length.

-Flanges: No
-Length: 160mm
-Diameter: 31.5mm
-Colour: Black, Grey, Gum, Pink.

Born out of one of the most popular tyres in BMX, the new BSD Donnastreet Tyre features a new smoother centre treat pattern as well as improved sidewalls for better grinding. Available in a 2.30" width and a 2.40" width, the Donnastreet Tyres are rated up to 110psi.

-Beading: Wire
-Width: 2.30", 2.40"
-Wheel Size: 20"
-PSI: 110
-Weight: 690g (2.25"), 730g (2.40")

Mid style bottom bracket from Eclat. The Eclat Mid BB comes with two precision sealed Mid BB bearings, Drive and None Drive cone spacers, two internal tube spacers (44mm and 50mm) and a variety of axle spacers for that perfect setup. Available in 19mm, 22mm and 24mm.

-BB Type: MID
-Axle Size: 19mm, 22mm, 24mm
-Colours: Black
-Weight: 189g (19mm), 174g (22mm), 148g (24mm)

Ultra Durable 1/2" X 1/8" Chain from BSD. The Forever chain features mushroomed pins, BSD stamped logos on the plates and has undergone rustproofing treatment before leaving the factory. The Forever chain also features a pre-installed halflink on one end to help you get that perfect wheel alignment.

-Chain Type: Full Link (One Half Link)
-Chain Width: 1/8"
-Colours: Black, Silver
-Weight: 250g

For a Limited time due to limited stock, The FoundationBMX Mystery Tee deal will be running until stocks last! Choose your size and receive 2 random Tee shirts chosen by us here at the shop! LOTS of Brands including: CULT, The Shadow Conspiracy, Voyage, Vans, Odyssey, Sunday, Animal and MORE!

Replacement Federal Clutch/Spring Kit for Federal Freecoaster Hubs. Also fits other Freecoaster Hubs like Primo Freemix and Stranger Ballast.

-Fits: Federal Freecoaster Hubs

The United Supreme Integrated Headset. Features 2 precision selaed campy style 45x45 bearings, 7075 alloy top cap and a few stack height spacers for that perfect fit.

-Headset Type: Integrated 45/45
-Colours: Black
-Weight: 65g

The Odyssey R Series forks are the latest breakthrough in fork technology since Odyssey released its 41 Thermal branding in 1999. The R Series forks are tested by machines and riders to make sure they can carry the 41 Thermal branding that gives them a lifetime guarantee. The 25 in the R25 stands for the forks offset, in the R Series you can get 25mm offset and 32mm offset. The R25 Forks have the shorter offset.

-Dropout Size: 3/8th (10mm)
-Top Cap: H24
-Offset: 25mm
-Colours: Black
-Weight: 1.95lbs

The Primo Stevie Integrated Headset features a 21mm tall top cap, much taller than the regular Primo Headset. It also features 2 precision sealed 45x45 bearings and all the regular bits and pieces needed to get your headset running smooth again.

Please note that the Black version of the Stevie headset comes with a slightly taller 23mm top cap.

-Headset Type: Integrated 45/45
-Colours: Black, Gold, Polished, Oil Slick, Red
-Weight: 78g

Brand new for 2018 from The Shadow Conspiracy are the Surface Pedals. A new design and concept with the rider of the current era in mind. The Surface Pedals feature a wider and thinner design than they have ever produced. With an overall thickness of just 18mm (24mm over the bearings). This combined with 12 Moulded pins and a fine micro knurled surface gives one of the highest performing plastic pedals on the market for sure.

-Material: Plastic
-Axle Size: 9/16" (3 Piece Cranks)
-Colour: Black, Double Bubble Pink
-Weight: 377g

New OSS Plastic Pegs from Primo. Primo have teamed with with OSS in LA to bring you a collaboration Plastic Peg to cater for the modern street rider. Featuring a alloy inner core with Nylon outer sleeve thats available in 4.5" and 4.75" lengths. 14mm with 10mm (3/8") adapter. Each Peg comes with a single OSS Block of wax in assorted colours.

-Peg Type: Plastic Peg
-Quantity: Single
-Length: 4.5", 4.75"
-Axle: 14mm with 10mm adapter
-Colours: Black
-Weight: 195g (4.5"), 204g (4.75")

New Campy style Integrated Headset from Federal. The Federal Headset comes with 2 different height top caps so you can use which suits your particular needs depending on how tall the steerer is on your forks.

-Headset Type: Integrated 45/45
-Colours: Black, Raw
-Weight: 69g

Ultra Durable half link chain from BSD. The 1991 Halflink chain features mushroomed pins, BSD stamped logos on the plates and has undergone rustproofing treatment before leaving the factory. Compatible with gearing down to an 8t driver.

-Chain Type: Half Link
-Chain Width: 1/8"
-Colours: Black, Silver
-Weight: 409g

 

Pivotal style seat post from Odyssey. Made from 6061 alloy this 200mm Pivotal post is available in 25.4mm diameter only. Compatible with Pivotal Seats Only.

-Post Type: Pivotal
-Post Diameter: 25.4mm
-Colours: Black
-Weight: 141g

The Eclat Contra Pedals are new for 2016, they offer the best of both worlds with Nylon bodies and removable metal pins. They feature a custom designed axle that allows the body to be lower profile whilst maintaining the strength in the axle itself.

-Material: Plastic
-Axle Size: 9/16" (3 Piece Cranks)
-Colour: Army Green, Black, Purple.
-Weight: 389g

Replacement Plastic Peg Sleeve for Eclat Venom Plastic Pegs. Made from Nylon/Fibreglass. 

-Peg Type: Replacement Plastic Sleeve
-Quantity: Single
-Length: 4", 4.5", 4.8".
-Colours: Black, Army Green, Purple, White.

A new version of the classic Edwin flangeless grips. Designed with a wavy mushroom style pattern that is soft and super comfortable. These grips also come with a pair of animal plastic sewer cap bar ends.

-Flanges: Flangeless.
-Length: 165mm.
-Diameter: 32mm.
-Colour: Army Green, Purple.